Millions of American homes built between 1965 and 1973 contain aluminum wiring and many of those homes are right here in Gloster, MS. If yours is one of them, understanding the risks and your remediation options isn't optional. It's a safety and insurance necessity.
Between 1965 and 1973, aluminum wiring was widely used in residential construction across the United States, including throughout Gloster, MS, as a lower-cost alternative to copper. The problem isn't the aluminum itself, but how it behaves at connection points over time. Aluminum expands and contracts more than copper with temperature changes, causing connections to loosen gradually. Loose connections create resistance, resistance creates heat, and heat creates fire risk, especially at outlet and switch connection points where these micro-loosening events happen repeatedly over decades.
The U.S. Consumer Product Safety Commission found that homes with aluminum wiring are 55 times more likely to have a connection reach fire-hazard condition than homes with copper wiring. This doesn't mean every aluminum-wired home in Gloster, MS is about to catch fire, but it does mean that untreated aluminum wiring connections should be treated as a real, documented risk that deserves professional evaluation and remediation.
Beyond the safety issue, aluminum wiring creates practical challenges for Gloster, MS homeowners. Many insurance companies either refuse to cover homes with untreated aluminum wiring or charge significantly elevated premiums. Home buyers and their agents increasingly request aluminum wiring remediation as a condition of sale, and home inspectors are required to note its presence in inspection reports. Having documented, professional aluminum wiring remediation completed by REOC Electrical protects your insurability, your home's marketability, and most importantly, your family's safety.
REOC Electrical Solutions has remediated aluminum wiring in hundreds of Gloster, MS homes. We begin every aluminum wiring project with a thorough inspection, checking every outlet, switch, fixture, and panel connection point for signs of overheating, oxidation, or improper connections. We then present you with a full remediation plan, explain the options clearly, and complete the work with proper permitting and inspection sign-off.
There is no single solution that fits every Gloster, MS home. Our electricians assess your specific situation and recommend the appropriate approach.
The most widely used and cost-effective approach. An approved connector (AlumiConn or COPALUM) is installed at every device connection point, creating a safe copper-to-aluminum junction. Recommended by the CPSC and widely accepted by Gloster, MS insurers.
Replacing standard outlets and switches with CO/ALR rated devices designed specifically for aluminum wiring connections. Less costly than pigtailing but covers fewer connection points and is not accepted by all Gloster, MS insurers.
When aluminum wiring is in poor condition, the home is undergoing renovation, or the homeowner prefers complete resolution, full rewiring with copper wiring eliminates the aluminum wiring concern entirely. We assess when this is the most practical option for your Gloster, MS home.
We inspect every outlet, switch, fixture, and panel connection for signs of overheating, oxidation, improper connections, and the presence of aluminum conductors. We document everything with photos.
Based on the inspection findings, we present a detailed remediation plan with clear options, costs, and the pros and cons of each approach for your specific Gloster, MS home's wiring condition.
Aluminum wiring remediation in Gloster, MS requires an electrical permit. We handle the application and ensure the scope of work meets all permitting requirements before scheduling installation.
Our electricians systematically work through each connection point in the home, every outlet, switch, and fixture, installing approved connectors or performing the agreed remediation method at each location.
The panel's aluminum branch circuit connections are also inspected and treated with anti-oxidant compound if needed. We check and torque all panel connections to manufacturer specifications.
After city inspection sign-off, we provide complete documentation, permit, inspection record, a description of all work performed, and the connector certification information, for your insurance company and home sale records.
Full residential electrical services for Gloster, MS homes of every age, from outlet and lighting work to complete rewiring and new circuit installation.
Don't leave aluminum wiring untreated. REOC Electrical Solutions provides expert aluminum wiring inspections and remediation throughout Gloster, MS, with complete documentation for your insurance company and peace of mind for your family.